本文共 5583 字,大约阅读时间需要 18 分钟。
打开文件fopen
函数原型: FILE *fopen(char *name,char *mode)
功能:按指定方式打开文件
返值:正常打开,为指向文件结构体的指针;打开失败,为NULL
文件关闭fclose
函数原型:int fclose(FILE *fp)
功能:关闭fp指向的文件
返值:正常关闭为0;出错时,非0
//
文件读取方式
//方法一
FILE *fp; //定义一个文件类型指针
fp=fopen("aa.c","w"); //打开一个文件 打开方式为w(只写.文本文件) aa.c为相对路径
if(fp==NULL) //判断文件打开是否成功
{
printf("File open error!\n");
exit(0); //终止程序 区别于return
}
//方法二
FILE *fp;
fp= fopen ("c:\\fengyi\\bkc\\test.dat","r"); //绝对路径 打开方式为r(只读.文本文件)
//方法三
FILE *fp;
char *filename="c:\\fengyi\\bkc\\test.dat"
fp= fopen(filename,”r”);
//
fputc与fgetc
fputc:
函数原型:int fputc(int c,FILE *fp)
功能:把一字节代码c写入fp指向的文件中
返值:正常,返回c;出错,为EOF
fgetc
函数原型:int fgetc(FILE *fp)
功能:从fp指向的文件中读取一字节代码
返值:正常,返回读到的代码值;读到文件尾或出错,为EOF
//
从键盘输入字符,逐个存到磁盘文件中,直到输入“#”为止
#include
int main()
{
FILE *fp;
char ch,*filename="out.txt";
if((fp=fopen(filename,"w"))==NULL) //打开文件失败
{
printf("cannot open file\n");
exit(0);
}
printf("Please input string:");
ch=getchar();
while(ch!='#')
{
fputc(ch,fp);
putchar(ch);
ch=getchar();
}
fclose(fp); //操作完后一定要关闭文件,一面数据丢失
return 0;
}
//
读文本文件内容,并显示
#include
int main()
{
FILE *fp;
char ch,"r"))==NULL)
{
printf("cannot open file\n");
exit(0);
}
while((ch=fgetc(fp))!=EOF)
putchar(ch);
fclose(fp);
return 0;
}
//
文件拷贝
#include
int main()
{
FILE *in,*out;
char ch,infile[10],outfile[10];
scanf("%s",infile);
scanf("%s",outfile);
if ((in = fopen(infile,"r"))== NULL)
{
printf("Cannot open infile.\n");
exit(0);
}
if ((out = fopen(outfile,"w"))== NULL)
{
printf("Cannot open outfile.\n");
exit(0);
}
while (!feof(in))
fputc(fgetc(in),out); //fgetc(in)返回一个字符光标向下移动一位,fputc(ch,fp)将字符输入到fp指向文件中光标始终留在最后;
fclose(in);
fclose(out);
return 0;
}
//
数据块的输入输出:fread与fwrite 返值:成功,返回读/写的块数;出错或文件尾,返回0
//
float f[2];
FILE *fp;
fp=fopen("aa.dat","rb");
fread(f,4,2,fp);
//
for(i=0;i<2;i++)
fread(&f[i],1,fp);
//
struct student
{ int num;
char name[20];
char sex;
int age;
float score[3];
}stud[10];
for(i=0;i<10;i++)
fread(&stud[i],sizeof(struct student),fp);
//
从键盘输入4个学生数据,把他们转存到磁盘文件中去
#include
#define SIZE 4
struct student_type
{ char name[10];
int num;
int age;
char addr[15];
}stud[SIZE];
int main()
{
int i;
for(i=0;i
scanf("%s%d%d%s",stud[i].name,&stud[i].num,&stud[i].age,stud[i].addr);
save();
display();
return 0;
}
void display()
{ FILE *fp;
int i;
if((fp=fopen("d:\\fengyi\\exe\\stu_dat","rb"))==NULL)
{
printf("cannot open file\n");
return;
}
for(i=0;i
{
fread(&stud[i],sizeof(struct student_type),fp);
printf("%-10s %4d %4d %-15s\n",stud[i].num,stud[i].age,stud[i].addr);
}
fclose(fp);
}
void save()
{ FILE *fp;
int i;
if((fp=fopen("d:\\fengyi\\exe\\stu_dat","wb"))==NULL)
{
printf("cannot open file\n");
return;
}
for(i=0;i
if(fwrite(&stud[i],fp)!=1)
printf("file write error\n");
fclose(fp);
}
//
格式化I/O:fprintf与fscanf 返值:成功,返回I/O的个数;出错或文件尾,返回EOF
//
fprintf(fp,"%d,%6.2f",i,t); //将i和t按%d,%6.2f格式输出到fp文件
fscanf(fp,%f",&i,&t); //若文件中有3,4.5,则将3送入i,4.5送入t
//
从键盘按格式输入数据存到磁盘文件中去
#include
int main()
{
char s[80],c[80];
int a,b;
FILE *fp;
if((fp=fopen("test","w"))==NULL)
{
puts("can't open file");
exit() ;
}
fscanf(stdin,"%s%d",s,&a);/*read from keaboard*/
fprintf(fp,"%s %d",a);/*write to file*/
fclose(fp);
if((fp=fopen("test","r"))==NULL)
{
puts("can't open file");
exit();
}
fscanf(fp,c,&b);/*read from file*/
fprintf(stdout,"%s %d",b);/*print to screen*/
fclose(fp);
return 0;
}
//
字符串I/O: fgets与fputs
返值:
fgets正常时返回读取字符串的首地址;出错或文件尾,返回NULL
fputs正常时返回写入的最后一个字符;出错为EOF
//
从键盘读入字符串存入文件,再从文件读回显示
#include
int main()
{
FILE *fp;
char string[81];
if((fp=fopen("file.txt","w"))==NULL)
{
printf("cann't open file");
exit(0);
}
while(strlen(gets(string))>0)
{ fputs(string,fp);
fputs("\n",fp);
}
fclose(fp);
if((fp=fopen("file.txt","r"))==NULL)
{
printf("cann't open file");
exit(0);
}
while(fgets(string,81,fp)!=NULL)
fputs(string,stdout);
fclose(fp);
return 0;
}
文件的定位
rewind函数
函数原型: void rewind(FILE *fp)
功能:重置文件位置指针到文件开头
反值:无
//
对一个磁盘文件进行显示和复制两次操作
#include
int main()
{
FILE *fp1,*fp2;
fp1=fopen("d:\\fengyi\\bkc\\ch12_4.c","r");
fp2=fopen("d:\\fengyi\\bkc\\ch12_41.c","w");
while(!feof(fp1))
putchar(getc(fp1));
rewind(fp1);
while(!feof(fp1))
putc(getc(fp1),fp2);
fclose(fp1);
fclose(fp2);
return 0;
}
//
fseek函数
函数原型: int fseek(FILE *fp,long offset,int whence)
功能:改变文件位置指针的位置
返值:成功,返回0;失败,返回非0值
offset:
位移量(以起始点为基点,移动的字节数)
>0 向后移动
<0 向前移动
whence:
起始点
文件开始 SEEK_SET 0
文件当前位置 SEEK_CUR 1
文件末尾 SEEK_END 2
ftell函数
函数原型: long ftell(FILE *fp)
功能:返回位置指针当前位置(用相对文件开头的位移量表示)
返值:成功,返回当前位置指针位置;失败,返回-1L,
//
磁盘文件上有3个学生数据,要求读入第1,3学生数据并显示
#include
struct student_type
{ int num;
char name[10];
int age;
char addr[15];
}stud[3];
int main()
{
int i;
FILE *fp;
if((fp=fopen("studat","rb"))==NULL)
{
printf("can't open file\n");
exit(0);
}
for(i=0;i<3;i+=2)
{
fseek(fp,i*sizeof(struct student_type),0);
fread(&stud[i],fp);
printf("%s %d %d %s\n",stud[i].addr);
}
fclose(fp);
return 0;
}
//
求文件长度(ch12_101.c)
#include"stdio.h"
int main()
{
FILE *fp;
char filename[80];
long length;
gets(filename);
fp=fopen(filename,"rb");
if(fp==NULL)
printf("file not found!\n");
else
{
fseek(fp,0L,SEEK_END);
length=ftell(fp);
printf("Length of File is %1d bytes\n",length);
fclose(fp);
}
return 0;
}
///
出错的检测
ferror函数
函数原型: int ferror(FILE *fp)
功能:测试文件是否出现错误
返值:未出错,0;出错,非0
说明
每次调用文件输入输出函数,均产生一个新的ferror函数值,所以应及时测试
fopen打开文件时,ferror函数初值自动置为0
clearerr函数
函数原型: void clearerr(FILE *fp)
功能:使文件错误标志置为0
返值:无
说明:出错后,错误标志一直保留,直到对同一文件调clearerr(fp)或rewind或任何其它一个输入输出函数
//
ferror()与clearerr()举例
#include
int main(void)
{
FILE *stream;
stream = fopen("DUMMY.FIL","w");
getc(stream);
if (ferror(stream))
{
printf("Error reading from DUMMY.FIL\n");
clearerr(stream);
}
if(!ferror(stream))
printf("Error indicator cleared!");
fclose(stream);
return 0;
}
转载地址:http://bbips.baihongyu.com/